CM-03N 40W UHF 400-490MHz Radio / Vehicle Transceiver

CM-03N  40 W UHF 400-490MHz Professional Radio  Vehicle Transceiver

UHF : 400-490MHz

RF Output Power:
25W(High) , 10W (Medium), 5W(Low)
Switchable transmission power

250 programmable memorized channels + CALL
Channel with alphanumeric channel name tag
12.5KHz/25KHz channel spacing programmable
2-tone encoder and decoder
DTMF encoder and decoder
CTCSS/DCS group scan, encoder and decoder
5 tone/ 2 tone/ DTMF signaling
Tone burst: 1000Hz, 1450 Hz, 1750 Hz and 2100 Hz
BCLO (Busy Channel Lockout)
Multiple scan functions are programmable
Priority channel
Keyboard lock can be activated
Car alarm and alert

Display background lit dimmable in 3 steps - 3 working modes available:
1) Frequency only mode
2) Frequency and Channel mode
3) Channel only mode

Repeater Shift programmable from 0 to 69,995 MHz in steps of 5 kHz
Frequency Steps : 5,0/6,25/10,0/12,5/20,0/25,0/30,0/ and 50,0 kHz
Repeater shift direction : + or –
Bandwidth switcheable: 25,0/ 20,0/ and 12,5 kHz
Speech Compander on/off.
Scan modes: timer/carrier switcheable
DTMF ANI On/Off - Alpha Numeric Identifi cation function is available by DTMF or 5 Tone signaling.

Voice compander: reduces background noise and improves transmitted voice quality.
Usefull for noisy environments and poor connections.

Function programmed with software and PC cable :

5-tone selective calling sequence according to ZVEI therefore also can be used as a tester for message recipients.
This function also replaces the alarm receiver.

Cloning feature: This feature allows all settings of a pre-programmed device to be transfered via a cable to another device.

With customerized software, CM-03N can be programmed as a ham mobile, which will be programmed through DTMF microphone.

Ports on the back: PL antenna connector (SO-239), and external speaker (3.5mm mono jack plug)
Large easy to read LCD display
Dimensions 160 x 43 x 141 mm W x H x D
Weight: 1.2 kg
 

PDF Specification

User Manual

Each box of CM-03N including:

1) Professional Vehicle Radio unit

2). Microphone (Non-DTMF Keypad)

3). DC Power Cable with Fuse Holder

4). Mobile Installing Bracket

5). Hardware Kits for Bracket